REFLECTOR: (RMI) & DAR

[Jeff Barnes]

Ooooo Kurt, I haven't been following the little bits but HEY, you're getting Airworthy ? Wow! Congratulatons #1 !!

Best Regards,

Jeff Barnes
847-331-2567

Sent from my iPad

> On Apr 10, 2014, at 5:30 PM, nmflyer1 at aol.com wrote:
> 
> Thanks everyone. Larry,  I'll try this and see if it helps. Thanks a lot. 
> 
> A different DAR finally called me back and said he might be able to fit me in on Monday or Tuesday. We shall see. 
> 
> Curious as to what the "going rate" is for the airworthiness inspection?..
> 
> Kurt 
> 
> 
> -----Original Message-----
> From: Laurence Coen <lwcoen at hotmail.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Thu, Apr 10, 2014 3:29 pm
> Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)
> 
> Kurt,
>  
> Here are some numbers to play with.  Hopefully the difference in the sensors is small.  The guy I sold my plane too should be coming through Albuquerque on the 17th.  You might make a connection.
>  
> Larry Coen
> N136LC (till the 17th)
> 
> From: nmflyer1 at aol.com
> Sent: Wednesday, April 09, 2014 12:24 PM
> To: reflector at tvbf.org
> Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)
> 
> Thanks Larry. I built my own too. And without the right data.. It is very confused at the moment :)
>  
> Kurt 
> 
> 
> -----Original Message-----
> From: Laurence Coen <lwcoen at hotmail.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Wed, Apr 9, 2014 10:42 am
> Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)
> 
> Kurt,
>  
> It just occurred to me that if you bought your instrument already assembled then the data would have been entered and your golden.  I assembled my own so I had to enter the data but it only needs to be done once.
>  
> Larry Coen
> N136LC
> 
> From: Kurt Winker
> Sent: Tuesday, April 08, 2014 10:42 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)
> 
> Thanks Larry. 
> 
> Tried 2 e-mails,   No response yet. 
> Not good at this point. 
> 
> Kurt. 
> 
> 
> 
> Sent from my iPad
> 
> On Apr 8, 2014, at 21:39, "Laurence Coen" <lwcoen at hotmail.com> wrote:
> 
>> Kurt,
>>  
>> Those sensor tables are for the sensor in your unit. They are not the same as the ones that came with my unit which I still have but they won't do you any good.  I don't think that that unit is still in production but if you contact the guy who made them with a serial number for your unit he may have saved the original data.
>>  
>> Good luck,
>> Larry Coen
>> N136LC
>> 
>> From: nmflyer1 at aol.com
>> Sent: Tuesday, April 08, 2014 7:17 PM
>> To: reflector at tvbf.org
>> Subject: REFLECTOR: Rocky Mountain Instruments (RMI)
>> 
>> Seems I have misplaced my Sensor Tables sheets for my Rocky Mountain Instruments Micro-Encoder. I need them for final calibration. Anyone have some or know of a source? 
>> 
>> Thanks, 
>> 
>> Kurt 
>> 
>> 
>>  
>> _______________________________________________
>> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>> 
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>> _______________________________________________
>> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>> 
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140410/3a0ceaad/attachment-0001.html>