REFLECTOR: Rocky Mountain Instruments (RMI)

[John Dibble]

Larry,

FWIW, your data is not even remotely similar to mine, so probably of no 
use for other units.

John

On 4/10/2014 4:26 PM, Laurence Coen wrote:
> Kurt,
> Here are some numbers to play with.  Hopefully the difference in the 
> sensors is small.  The guy I sold my plane too should be coming 
> through Albuquerque on the 17th.  You might make a connection.
> Larry Coen
> N136LC (till the 17th)
>
> *From:* nmflyer1 at aol.com <mailto:nmflyer1 at aol.com>
> *Sent:* Wednesday, April 09, 2014 12:24 PM
> *To:* reflector at tvbf.org <mailto:reflector at tvbf.org>
> *Subject:* Re: REFLECTOR: Rocky Mountain Instruments (RMI)
>
> Thanks Larry. I built my own too. And without the right data.. It is 
> very confused at the moment :)
> Kurt
>
>
> -----Original Message-----
> From: Laurence Coen <lwcoen at hotmail.com <mailto:lwcoen at hotmail.com>>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org 
> <mailto:reflector at tvbf.org>>
> Sent: Wed, Apr 9, 2014 10:42 am
> Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)
>
> Kurt,
> It just occurred to me that if you bought your instrument already 
> assembled then the data would have been entered and your golden.  I 
> assembled my own so I had to enter the data but it only needs to be 
> done once.
> Larry Coen
> N136LC
>
> *From:* Kurt Winker <mailto:nmflyer1 at aol.com>
> *Sent:* Tuesday, April 08, 2014 10:42 PM
> *To:* Velocity Aircraft Owners and Builders list 
> <mailto:reflector at tvbf.org>
> *Subject:* Re: REFLECTOR: Rocky Mountain Instruments (RMI)
>
> Thanks Larry.
>
> Tried 2 e-mails,   No response yet.
> Not good at this point.
>
> Kurt.
>
>
>
> Sent from my iPad
>
> On Apr 8, 2014, at 21:39, "Laurence Coen" <lwcoen at hotmail.com 
> <mailto:lwcoen at hotmail.com>> wrote:
>
>> Kurt,
>> Those sensor tables are for the sensor in your unit. They are not the 
>> same as the ones that came with my unit which I still have but they 
>> won't do you any good.  I don't think that that unit is still in 
>> production but if you contact the guy who made them with a serial 
>> number for your unit he may have saved the original data.
>> Good luck,
>> Larry Coen
>> N136LC
>>
>> *From:* nmflyer1 at aol.com <mailto:nmflyer1 at aol.com>
>> *Sent:* Tuesday, April 08, 2014 7:17 PM
>> *To:* reflector at tvbf.org <mailto:reflector at tvbf.org>
>> *Subject:* REFLECTOR: Rocky Mountain Instruments (RMI)
>>
>> Seems I have misplaced my Sensor Tables sheets for my 
>> Rocky Mountain Instruments Micro-Encoder. I need them for final 
>> calibration. Anyone have some or know of a source?
>>
>> Thanks,
>>
>> Kurt
>>
>>
>> Front view of RMI microEncoder.
>> ------------------------------------------------------------------------
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail 
>> <http://www.tvbf.org/pipermail>
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
>



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140410/20b5a7cc/attachment-0001.html>