REFLECTOR: engine break in

[Andrew Ellzey]

Lou,

This is what I am using, see attached photo. This oil is a mineral based oil, so you don,t have to know when the rings seat to change oil types, you just keep on flying. 

Andy Ellzey





Sent from my iPhone

On Jul 27, 2013, at 10:32 PM, "Lou Stedman" <stedmanlou at roadrunner.com> wrote:

> I just had all four cylinders on my o-360 milled out 10/1000 and new pistons and rings. The engine only had 400 hours on it since major. One guy tells me to run my normal oil. Another tells me to run mineral oil. Another tells me to run mineral oil for ten hours and then go back to regular oil. Little confusing. I would welcome thoughts from the group. Thanks
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130728/823f363e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 38968 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130728/823f363e/attachment-0001.jpeg>