REFLECTOR: Vibration.

[Kurt Winker]

Not with my pencil


Sent from my iPhone

> On May 11, 2014, at 14:40, John Dibble <aminetech at bluefrog.com> wrote:
> 
> Think you may have an extra zero in those numbers.  Surely the blades don't vary by almost an inch.
> 
> John
> 
>> On 5/11/2014 1:09 PM, Kurt Winker wrote:
>> Placed a dial indicator against the aft face of the crush plate. Noticed a .012" difference around the no. 2 blade. 
>> Removed prop, checked blade thickness next to each bolt hole at the root of all 3 blades. 
>> Blades varied from 1.087 to 2.015. Blade 2 was thicker. 
>> Checked squareness of motor housing to flange while not under torque....perfect. 
>> Checked thickness And trueness of crush plates...perfect. 
>> Seems the blades are the issue.
>> 
>> Brian, do you recall the difference in Mike Deeter's blades? 
>> Could just be the problem here....let's hope!  I need a fix. 
>> 
>> 
>> 
>> 
>> Kurt
>> 
>> Sent from my iPad
>> 
>> On May 10, 2014, at 17:07, Brian Michalk <michalk at awpi.com> wrote:
>> 
>>> Just for grins before you take off the blades.  Turn the indicator 90 degrees and measure the crush plate.
>>> I bet you see movement there that correlates to a thicker/thinner blade root.
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>>> 
>>> Visit the gallery!  www.tvbf.org/gallery
>>> user:pw = tvbf:jamaicangoose
>>> Check new archives: www.tvbf.org/pipermail
>>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> 
> 
>   			 			
> This email is free from viruses and malware because avast! Antivirus protection is active.
> 
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140511/3dedc641/attachment.html>