REFLECTOR: (RMI) & DAR

[Douglas Holub]

I paid $400 five years ago.  And I think that was typical.
  ----- Original Message ----- 
  From: nmflyer1 at aol.com 
  To: reflector at tvbf.org 
  Sent: Thursday, April 10, 2014 6:30 PM
  Subject: Re: REFLECTOR: (RMI) & DAR


  Thanks everyone. Larry,  I'll try this and see if it helps. Thanks a lot.  


  A different DAR finally called me back and said he might be able to fit me in on Monday or Tuesday. We shall see. 


  Curious as to what the "going rate" is for the airworthiness inspection?..


  Kurt 




  -----Original Message-----
  From: Laurence Coen <lwcoen at hotmail.com>
  To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
  Sent: Thu, Apr 10, 2014 3:29 pm
  Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)


  Kurt,

  Here are some numbers to play with.  Hopefully the difference in the sensors is small.  The guy I sold my plane too should be coming through Albuquerque on the 17th.  You might make a connection.

  Larry Coen
  N136LC (till the 17th)


  From: nmflyer1 at aol.com 
  Sent: Wednesday, April 09, 2014 12:24 PM
  To: reflector at tvbf.org 
  Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)


  Thanks Larry. I built my own too. And without the right data.. It is very confused at the moment :) 

  Kurt 



  -----Original Message-----
  From: Laurence Coen <lwcoen at hotmail.com>
  To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
  Sent: Wed, Apr 9, 2014 10:42 am
  Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)


  Kurt,

  It just occurred to me that if you bought your instrument already assembled then the data would have been entered and your golden.  I assembled my own so I had to enter the data but it only needs to be done once.

  Larry Coen
  N136LC


  From: Kurt Winker 
  Sent: Tuesday, April 08, 2014 10:42 PM
  To: Velocity Aircraft Owners and Builders list 
  Subject: Re: REFLECTOR: Rocky Mountain Instruments (RMI)


  Thanks Larry. 


  Tried 2 e-mails,   No response yet. 
  Not good at this point. 


  Kurt. 




  Sent from my iPad

  On Apr 8, 2014, at 21:39, "Laurence Coen" <lwcoen at hotmail.com> wrote:


    Kurt,

    Those sensor tables are for the sensor in your unit. They are not the same as the ones that came with my unit which I still have but they won't do you any good.  I don't think that that unit is still in production but if you contact the guy who made them with a serial number for your unit he may have saved the original data.

    Good luck,
    Larry Coen
    N136LC


    From: nmflyer1 at aol.com 
    Sent: Tuesday, April 08, 2014 7:17 PM
    To: reflector at tvbf.org 
    Subject: REFLECTOR: Rocky Mountain Instruments (RMI)


    Seems I have misplaced my Sensor Tables sheets for my Rocky Mountain Instruments Micro-Encoder. I need them for final calibration. Anyone have some or know of a source?  


    Thanks, 


    Kurt 






----------------------------------------------------------------------------

    _______________________________________________
    To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

    Visit the gallery!  www.tvbf.org/gallery
    user:pw = tvbf:jamaicangoose
    Check new archives: www.tvbf.org/pipermail
    Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 
    _______________________________________________
    To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

    Visit the gallery!  www.tvbf.org/gallery
    user:pw = tvbf:jamaicangoose
    Check new archives: www.tvbf.org/pipermail
    Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

------------------------------------------------------------------------------

  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

------------------------------------------------------------------------------

  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html




------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140410/15ef778f/attachment.html>