REFLECTOR: engine break in

[Scott Baker]

http://hhh.gavilan.edu/hspenner/Main/Manuals/Lycoming-Engines/Misc_Pubs/KEY%20REPRINTS.pdf

This a link to Lycoming Flyer Key Reprints.
It features the Lycoming factory recommendations relating to engine 
break-in procedures.
For some reason, the Lycoming web site is down - so could not access the 
reprints directly from the Lycoming site.
Scott B


On 7/27/2013 11:32 PM, Lou Stedman wrote:
> I just had all four cylinders on my o-360 milled out 10/1000 and new 
> pistons and rings. The engine only had 400 hours on it since major. 
> One guy tells me to run my normal oil. Another tells me to run mineral 
> oil. Another tells me to run mineral oil for ten hours and then go 
> back to regular oil. Little confusing. I would welcome thoughts from 
> the group. Thanks
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130728/b20f3851/attachment.html>