REFLECTOR: Changing Mag wires IO360

[Tom Cacek]

Use a close quarters ratcheting screw driver.  They are a small ratchet that accepts 1/4" hex screw driver bits.  No big deal with the right tool.


-----Original Message-----
From: Kevin Baker <flykb at verizon.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Mon, May 14, 2012 11:54 am
Subject: REFLECTOR: Changing Mag wires IO360


Hi All
I was wondering if anyone had any suggestions for changing out mag plug wires.
I have a std with an IO360 and it's pretty close between the mag and the 
firewall.
Was wondering what a good procedure may be.

Thanks
Kevin Baker
N164PS

.
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120514/e9441842/attachment.htm>