REFLECTOR: FW: Epoxy ratio

[Alex Balic]

Well, I figured that the 44:100 was a volume ratio- i.e. set like the
factory gear pump, or the sticky stuff dispenser- probably, the resin and
hardener are very similar in weight, so I will go with that- 

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Reiff Lorenz
Sent: Wednesday, March 21, 2012 4:43 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: FW: Epoxy ratio

 

Alex,

 

Here are the words right from the manual.

 

Aero-Poxy- This is a one - one mix Structural Adhesive. Used in the kit for
bonding

premade parts together and bonding in Metal parts. Structural Adhesive
usually

needs to be thickened with a filler like Cabosil.

 

EZ-Poxy - is used in all major lay-ups on foam and all lay-ups of glass to
glass. EZ-Poxy

hardener is mixed with DER 324 resin at a 44:100 ratio.

 

Hope this helps.

 

Reiff Lorenz

Dayton, OH

XL-RG, 30% done, installing canard-tip landing lights.

 

 

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Alex Balic
Sent: Wednesday, March 21, 2012 4:32 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: REFLECTOR: FW: Epoxy ratio

 

 

 

 

Anyone have the Velocity-supplied structural epoxy ratio by weight handy? I
left my manual at the hangar and I am needing to do a little bit of work
here at home..

I need the ratio by weight, not volume- I am mixing up some smaller batches.

 

Thanks,

 

Alex

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120321/607e26ef/attachment-0001.htm>