REFLECTOR: Jeffco spec sheet

[John Dibble]

I was thinking a better product was needed.  Sounds like we already had 
one.  Is there a way I can tell what was used in my tank?

John

On 3/20/2012 11:01 AM, Laurence Coen wrote:
> I find it interesting that the spec sheet, under surface preparation, 
> says not to apply over epoxy coatings.... like the inside of a 
> Velocity fuel tank.  I built my tanks prior to Jeffco becoming the 
> thing to do.  I used 4 coats of EZpoxy and no problems 7 years of 100 
> LL later.  I did not check EZpoxy with mogas but I did test it with 
> denatured alcohol which is ethyl and methyl alcohol plus acetone.  A 
> scrap in a two month soak test showed no physical changes in it's 
> properties that I could detect.
> Larry Coen
> N136LC
>
> *From:* Tom Falls <mailto:tomfalls6 at gmail.com>
> *Sent:* Sunday, March 18, 2012 8:28 PM
> *To:* 'Velocity Aircraft Owners and Builders list' 
> <mailto:reflector at tvbf.org>
> *Subject:* REFLECTOR: Jeffco spec sheet
>
> Attached is the spec sheet for the coating I received from A/S when I 
> ordered "Jeffco" about a year ago.
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail <http://www.tvbf.org/pipermail>
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120320/dae66d2a/attachment.htm>