REFLECTOR: Jeffco spec sheet

[Laurence Coen]

I find it interesting that the spec sheet, under surface preparation, says not to apply over epoxy coatings.... like the inside of a Velocity fuel tank.  I built my tanks prior to Jeffco becoming the thing to do.  I used 4 coats of EZpoxy and no problems 7 years of 100 LL later.  I did not check EZpoxy with mogas but I did test it with denatured alcohol which is ethyl and methyl alcohol plus acetone.  A scrap in a two month soak test showed no physical changes in it's properties that I could detect.

Larry Coen
N136LC


From: Tom Falls 
Sent: Sunday, March 18, 2012 8:28 PM
To: 'Velocity Aircraft Owners and Builders list' 
Subject: REFLECTOR: Jeffco spec sheet


Attached is the spec sheet for the coating I received from A/S when I ordered "Jeffco" about a year ago.



--------------------------------------------------------------------------------


_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120320/1c8d952c/attachment-0001.htm>