REFLECTOR: Canard Center Hinge Part 2

[Richard J. Gentil]

Resending the second picture:



Sent from my iPhone 4

On Mar 20, 2011, at 12:02 AM, Andrew Ellzey <ajlz72756 at yahoo.com> wrote:

> Richard,
>  
> Your pictures didn't come through my yahoo mail service. My thoughts of your problem don't sound like the oil lite bushings could cause what you are talking about. Your elevators are joined together by the elevator torque tubes. I would inspect at you center bushings and where the torque tubes bolt to each elevator. I think you are on the right path to remove you canard and look everything over. Review chapter 3 of the Velocity manual.
>  
> Be careful be safe,
>  
> Andy
> 
> From: Richard J. Gentil <richard at naples-air-center.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Sat, March 19, 2011 10:27:57 PM
> Subject: REFLECTOR: Canard Center Hinge Part 2
> 
> Second picture. 
> 
> 
> 
> 
> Richard
> 
> Sent from my iPhone 4
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110320/3e3aca91/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 649895 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110320/3e3aca91/attachment-0001.jpeg>