REFLECTOR: Velocity Parts Free to a Good Home

[Andy Millin]

I've been cleaning up the shop and have a few Velocity parts that are not
going to get used.
 
The parts are for an XL.  Though, knowing Velocity, I wouldn't doubt they
might be useable on a standard as well.
 
I have a set of the original rudder pedals.  Finished through black paint.
I upgraded to the toe brakes. 
 
 Click to Enlarge <http://www.kal-soft.com/velocity/images/pic1000.jpg> 
 
I also have the Velocity belly NACA inlet scoop.  Yep, it came with the kit
and was all the rage in 2000 when I recieved my kit.  It is approximately 3
1/2 feet long and a little over a foot wide.  It mounts like the NACA type
inlet you might have seen on a Trans-Am hood.  To be honest, I don't think I
ever saw one mounted on a Velocity.  Shortly after my kit was delivered, the
overhead inlets were developed and intakes went on top.
 
This piece might be useful for someone installing a turbo charger, or
possibly an automotive conversion and needs another inlet for intake or
cooling.
 
Very Rare!  Be the first on your block to own one!
 
These parts are free to the first requester.  You'll pay the shipping.  :)
 
Andy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110124/9495c0c6/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 20082 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110124/9495c0c6/attachment-0001.jpeg>