REFLECTOR: PK Screws for Door Damper Bracket

[Andy Millin]

Keith,

I have used these.  They are stainless 100 degree.  I bought 100 of them.
They have been nice to have around for stuff like this.

http://www.microfasteners.com/catalog/products/SSCFCMXS.cfm 

Andy



-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Keith Hallsten
Sent: 02-07-2008 11:54
To: 'Velocity Aircraft Owners and Builders list'
Subject: Re: REFLECTOR: PK Screws for Door Damper Bracket

Thanks, Ken!  #10 x 1" Flat-Head Zinc-Plated Sheet Metal Screws it is!  My
local Ace Hardware has them in Philips drive. 

 

 

________________________________

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of KMis178813 at aol.com
Sent: Thursday, February 07, 2008 6:27 PM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: PK Screws for Door Damper Bracket

 

Keith

  I checked my kit and they are 10 X 1 flat head sheet metal screws (80207
?). They are NOT 100 degree screws and my countersunk holes, match the
screws. Good Luck.

    Ken

 

 

In a message dated 2/7/2008 9:17:55 P.M. Eastern Standard Time,
KeithHallsten at quiknet.com writes:

	I meant than the countersinking appears to be 100 degrees, not 37
degrees!

	
________________________________


	From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]
On Behalf Of Keith Hallsten
	Sent: Thursday, February 07, 2008 5:35 PM
	To: Velocity Aircraft Owners and Builders list
	Subject: REFLECTOR: PK Screws for Door Damper Bracket

	I was going to mount the angle brackets to the doors today.  The
manual says to use "PK Screws".  No hint as to diameter, length, head style,
material, finish, or part number.  I searched through my fasteners, but did
not find any "PK Screws".  The materials list for the chapter does not list
any, either.  

	The brackets are countersunk, so I surmise that either flat head or
oval head screws are intended.  

	Upon arriving back at home, a Google search reveals that PK Screws
are sheet metal screws, and are available in many combinations of diameter,
length, material, finish and head style.  Does anyone know what part is
actually intended so that I can order some?  Since the countersinking seems
to be 37 degrees, I don't suppose that I can find any locally.

	Thanks! 

	Keith Hallsten

	
	
	_______________________________________________
	To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
	
	Visit the gallery!  www.tvbf.org/gallery
	user:pw = tvbf:jamaicangoose
	Check new archives: www.tvbf.org/pipermail
	Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html





________________________________

Who's never won? Biggest Grammy Award surprises of all time on AOL Music.
<http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp0030000
0002548>