REFLECTOR: fuel strainers

[Ron Brown]

Two different measurement systems.  Pipe thread and tubing size.

Pipe thread sizes are the confusing ones - 1/8 is more like 1/4" id, 1/4 is 
more like 3/8" id, etc.  Well you have to watch out for tubing sizes too - 
they can mean ID or OD.

Ron

----- Original Message ----- 
From: <gattenby at tulsaconnect.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Wednesday, July 04, 2007 11:02 AM
Subject: REFLECTOR: fuel strainers


>
>
> The finger strainers for fuel, that I see on the
> wicks and spruce web site, are 1/4 inch female fittings.
> I haven't gone out to the shop this AM, but
> I thought that the fuel line was 3/8.
> Am I missing something or do I just need more coffee?
>
> Noel
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>