REFLECTOR: RG Questions

[John Dibble]

Thanks.

John

Laurence Coen wrote:

> John, The aluminum bushings have iolite bearing inserts so the bolt is
> supposed to turn with the gear leg.  The nut needs to be adjusted so
> that the bolt doesn't slide back and forth but not so tight as to
> prevent it from turning freely in the aluminum bushings. Larry
> CoenN136LC
>
>      ----- Original Message -----
>      From: John Dibble
>      To: Velocity Aircraft Owners and Builders list
>      Sent: Tuesday, April 10, 2007 8:41 AM
>      Subject: Re: REFLECTOR: RG Questions
>       So, how tight should the nut be?
>
>      John
>
>      Laurence Coen wrote:
>
>     >  The purpose of the nut is to keep the bolt from falling
>     > out, not to remove slop in the gear leg support.
>
>      -------------------------------------------------------------
>
>      _______________________________________________
>      To change your email address, visit
>      http://www.tvbf.org/mailman/listinfo/reflector
>
>      Visit the gallery!  www.tvbf.org/gallery
>      user:pw = tvbf:jamaicangoose
>      Check new archives: www.tvbf.org/pipermail
>      Check old archives:
>      http://www.tvbf.org/archives/velocity/maillist.html
>
>    ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070410/5bf3c222/attachment.htm