REFLECTOR: Fastbuild Wing Delaminations

[Hiroo Umeno]

We were applying and sanding the "Smooth UV Primer" and discovered that
our fast build wing we got in 1999 has developed series of delamination
bubbles.  Most are about 1 inch in diameter but one is about 6 inch.
Most are located on top of the wing the near the leading-edge.

 

I have read here that the standard repair procedure is to drill a hole
on top of the bubble and inject them with epoxy, then sand smooth.  Is
that still the commonly accepted practice?

 

Hiroo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060710/9e8c6b6c/attachment-0001.htm