REFLECTOR: Idle Adjustment for Fuel Injected Lycomings

[MMurp16900 at aol.com]

Hi Jorge
Thanks redoing my poor copy of instructions for RA-5 and RSA-10  systems
I hope all the folks with LYC.none vertical mounted fuel servo have  
installed sniffer check drain at the bottom of your intake manifold and the ball  is 
closed when the engine is running.
 
fuel injector systems.
I would add to paragraph 5-9 the factory adjustment between  blocks before 
field adjustment 
is .478 inch.
 
If at a high elevation set rpm at 750 rpm with set screw with throttle  closed
Set mixture adjusting wheel for minimum manifold pressure.
Check acceleration and clear at 2000 rpm.
after all adjustments set wheel two clicks rich for see level  operation
Regards 
Mack
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20061206/0bf06578/attachment.htm