REFLECTOR: Oil Cooler

[nmflyer1 at aol.com]

Fluidyne will give you all the specs for every cooler that they make. It seems that most others will not though. Give them a call, they may have (or be able to make) whatever you need. They seem to have good stuff. 
 
Kurt  
 
-----Original Message-----
From: Brian Michalk <michalk at awpi.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Sun, 23 Oct 2005 19:00:36 -0700
Subject: Re: REFLECTOR: Oil Cooler


Larry Parham wrote: 
> My wingroot oil cooler seems to be out of a 1990 Buick Regal (that is > what is hand written on it). My question is this. Is this cooler of a > good enough quality and if so would you trust an automotive rebuilder to > repair my leak? THANKS 
>  
What's the burst pressure of the automotive cooler? Going auto, I would make sure it's 2 or 2.5 times higher than max pressure for your engine. 
 
The problem with auto stuff is that it's hard to find these engineering specifications sometimes. 
_______________________________________________ 
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector 
 
Visit the gallery! www.tvbf.org/gallery 
user:pw = tvbf:jamaicangoose 
Check new archives: www.tvbf.org/pipermail 
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20051023/a3ddba5d/attachment.html