REFLECTOR: Help-elevators

[Richard Riley]

At 06:18 PM 5/21/05, you wrote:

>You could always ask the factory to send you another core to use, but that 
>probably isn't necessary.
>I remember making the filler piece 4"-6" wide. If you have some pour foam, 
>it would be easier than what I did by using a scrap piece or blue foam. 
>Get everything jigged up where you want it, make a small dam, and put the 
>pour foam between the good blue cores. wait til it is cured, and rough cut 
>by hand with a hack saw blade. Then sand the last bit to match.

Use blue foam.  Don't use pour foam.  Later on (like, after you're flying) 
when it gets hot in the sun it will expand again.