REFLECTOR: Franklin seal leak

[John Dibble]

My hub has separate threaded holes spaced between the prop bolts, so it is easier for
adding washers.

John

Wayne wrote:

> The spare threads available on the prop bolts is limited and the mass
> required is much greater (low moment). It looked like I was going to need a
> couple of longer bolts (more weight in itself) to hold the washers on a
> previous prop balance job. Then there is the hassle of the frequent torque
> checks until it settles down, that adds to the fun.
> ----- Original Message -----
> From: "John Dibble" <aminetech at bluefrog.com>
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Sent: Monday, April 18, 2005 11:03 PM
> Subject: Re: REFLECTOR: Franklin seal leak