REFLECTOR: CABLE SWAGING

[Pat Shea]

Tom,

Unless your set-up is different than mine, you can
just buy some replacement cables (two) from the
factory for your main gear that already have threaded
ends. You re-use your rod ends. If you don't have
enough threads left on your rod ends to to do the job
now, this is probably the best approach to further
tighten the cables.

Pat 

--- Tom Martino <tmartino at troubleshooter.com> wrote:
> Cable may be cheap ... but not when they are
> connected on one end to expensive rod end bearings. 
> I wanted to tighen up the main langing gear cable
> where it attaches top the gear leg.
> 
> 	-----Original Message----- 
> 	From: robajohnson at comcast.net
> [mailto:robajohnson at comcast.net] 
> 	Sent: Thu 7/1/2004 2:04 PM 
> 	To: Velocity Aircraft Owners and Builders list 
> 	Cc: 
> 	Subject: Re: REFLECTOR: CABLE SWAGING
> 	
> 	
> 
> 	> Can cables be "un-swaged" without ruining the
> cable?
> 	I'd be willing to bet it could be done if you were
> patient and careful.
> 	Cable is awfully cheap so I am curious- why would
> you want to?
> 	DM Rob
> 	_______________________________________________
> 	To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> 	
> 	Visit the gallery!  www.tvbf.org/gallery
> 	user:pw = tvbf:jamaicangoose
> 	Check new archives: www.tvbf.org/pipermail
> 	Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
> 	
> 
> > _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html





		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail