REFLECTOR:Instument panels Fiberglass/Aluminum

[Scott]

Nice panel Steve.  Did you use Bob K's(Aerolectric) split buss/dual battery 
system?

Scott

At 01:35 PM 1/9/2004, you wrote:
>Several People saw my panel when my plane was at velocity and several more 
>asked about it.
>So I took the pictures I had and finally put them into an easy 
>format.  The panel used the Fiberglass blank from Velocity as skeleton and 
>uses aluminum as the mounting platform. All the major components are on 
>sub panels for easy maintenance an upgrade in the future.  The breakers 
>are on a 2 foot umbilical sub panel so I can take out the panel and do 
>work on the back of the breaker in my lap rather than underneath on my 
>back.  The panel is all electric with dual buss, dual battery and dual 
>alternator with a custom buss A/B/ both switch.  I chose a conventional 
>layout but may upgrade to a glass displays in the future.
>
>Take a look and let me you’re your thoughts there in the gallery
>root/subsystems/instrument panels/787SBXL-RG link below
>
>http://www.tvbf.org/gallery/index.php?dir=subsystems%2Finstrument_panel%2F787SB%20%20XL-RG%20Panel
>
>Thanks and I hope this helps with some ideas
>Steve
>N787SB
>XLRG
>_______________________________________________
>To change your email address, visit 
>http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html