REFLECTOR: ATTN: Franklin Owners

[Hiroo Umeno via Reflector]

We got the 244-6116 and discovered that the hole pattern / distances are different from the Sky-Tec / Accessory mount and it will not fit.  Is there an adaptor or something we need to make this part fit?

Incidentally, we also discovered that it was not the shear pin that failed on the Sky-Tec.  The gear that is attached to the motor shaft broke itself into about 20 little pieces.

Hiroo

From: Reflector [mailto:reflector-bounces at tvbf.org] On Behalf Of Hiroo Umeno via Reflector
Sent: Wednesday, December 31, 2014 9:14 PM
To: Larry Parham; Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: ATTN: Franklin Owners

Thank you.

That makes two independent references to the same exact part.  I appreciate the quick information.  We may yet get the albatross into the air in 2015!

Happy New Year

From: Reflector [mailto:reflector-bounces at tvbf.org] On Behalf Of Larry Parham via Reflector
Sent: Wednesday, December 31, 2014 8:27 PM
To: reflector at tvbf.org<mailto:reflector at tvbf.org>
Subject: Re: REFLECTOR: ATTN: Franklin Owners

Hiroo, Franklin drivers are using a NAPA  Honda Civic starter  part number 244-6116 it seems to be a direct replacement and has worked flawlessly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20150105/7dfec4fc/attachment.html>