REFLECTOR: Divinycell foam

[Jeff Barnes]

I got replacement from factory




________________________________
 From: Phil Hooper <phil at hdmnet.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org> 
Cc: Robert & Taylor Rice <yldrice123 at yahoo.com> 
Sent: Monday, March 10, 2014 8:18 PM
Subject: REFLECTOR: Divinycell foam
 


Slow building Hooper here.  I ordered more Divinycell foam 3/8" from Spruce for the fuel strake build.  My original sheet was damaged in storage.  This stuff is tan color, not blue as came in the kit.  

From Spruce: 
Divinycell (PVC)
Type H45 3 Lb/Cu. Ft. 3/8" 32" x 48" 01-12400 Their description says:  A closed cell medium to high density foam which has high compression 
strength, durability, and excellent fire resistance. Divinycell can be 
vacuum formed to compound shapes and can be bent using heat. Compatible 
with polyester, vinylester, and epoxy resins.


This all sounds fine, but I would appreciate any thoughts from the collective before applying the Elmer's glue.  Thanks much.

-- 

-- 
Phil Hooper
President
 Harvest Development & Media Inc.
19851 Yorba Linda Blvd., Suite 204
Yorba Linda, CA 92886 
voice: 714.693.8745
fax: 714.777.0134
web: http://www.hdmnet.com/
email: phil at hdmnet.com

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140310/8a8a8c7e/attachment.html>