REFLECTOR: Prop wanted

Tue Apr 8 09:59:11 CDT 2014

I too will most likely be looking for a new prop and was looking at a Catto.  I presently have a 2 blade Demuth and have been told that a 3 blade would be better in a pusher situation.  Wonderijng if you could call me to discuss the Catto prop? Wondering the size and pitch?
Thx, Jeff

Thank you, Jeff
TEAM JEFF Real Estate

Jeff Findarle - Realtor, GRI
 PRES.-Wasatch Co Association of Realtors
Darin Heckel - Realtor                     AllStar Realty
575 N main St.
Heber City, UT. 84032

Jeff's Cell 435-503-0514435-503-0514
Darin's Cell 435-671-3957435-671-3957
Off. 435-654-9440435-654-9440
Fax               435-654-9437
Distressed Property Experts, Short Sales a Specialty!
Don't Lose it, Sell it!
On Monday, April 7, 2014 4:49 AM, Dick Harpster <dick-centralsecurity at nc.rr.com> wrote:

I have a new Cato prop, spinner and extender, still wrapped in the factory plastic. It is however for an IO-540. I don’t know if it will work on the 360.
>Dick Harpster
> 
>From:reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Chris Barber
>Sent: Monday, April 07, 2014 6:13 AM
>To: Mike Dawson; Velocity Aircraft Owners and Builders list
>Subject: Re: REFLECTOR: Prop wanted
> 
>The rotary is running well...but I think you nailed it when you said "it's just more trouble than it is worth".  I feel as if I kept taking two steps forward, but three steps back.  I turn 53  on May 8th....I would hope to fly more than six hours in 18 months restricted to orbiting the airport, before I get too old and/or lose my medical. I still like the rotary.  I have much time and money in it and now a pretty solid understanding, but at some point (unlike Washington) you need to stop throwing money and effort at a problem....especially when there may be better options. 
> 
>My plane has been in the same level of primer with a very incomplete interior for years now.  Not having to continually focus on the engine development may actually allow me to move forward and make the plane as pretty as it deserves to be. 
> 
>I may have a line on a pre-owned but never used pusher MT prop too.  We will see. I may just be choosing another set of problems......
> 
>Chris
>
>________________________________
>
>From:reflector-bouncees at tvbf.org [reflector-bounces at tvbf.org] on behalf of Mike Dawson [medawson250 at yahoo.com]
>Sent: Sunday, April 06, 2014 1:37 PM
>To: Velocity Aircraft Owners and Builders list
>Subject: Re: REFLECTOR: Prop wanted
>So did the Mazda die, PSRU give up or was it more trouble than it is worth?
> 
>Mike
>N104DD
>Chevy V8
>On Sunday, April 6, 2014 11:25 AM, Chris Barber <cbarber at texasattorney.net> wrote:
>I purchased a Continental 360. It is being overhauled.
>
>The prop I was thinking I could use is not going to work, so, while I try to save for a nice MT, does anyone have an appropriate prop that they care to part with that would work for a Velocity SE?
> 
>I know more info is needed but wanting to put out feelers to see what may be sitting in the back of someone's hangar before I go have one made.
>
>Thanks.
>
>Chris Barber
>Houston
> 
>P.S. I will be cross posting this so forgive the redundancy as many of us are on the same lists.
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>________________________________
>
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1432 / Virus Database: 3722/6807 - Release Date: 04/06/14
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140408/04cc9b58/attachment.html>