REFLECTOR: Starter contactor
steve korney
s_korney at hotmail.com
Thu Jul 18 23:17:05 CDT 2013
Anyone consider the weight of a 12 volt battery vs. a 24 volt system...?
Steve
Date: Thu, 18 Jul 2013 19:55:28 -0600
From: scott at tnstaafl.net
To: reflector at tvbf.org
Subject: Re: REFLECTOR: Starter contactor
My ground return is the 5/8 thick wall copper tubing(2) that my oil runs in. My battery and apt wire is a single OO wire.
Douglas Holub <douglas.holub at gmail.com> wrote:
Just out of curiosity, I calculated how much wire weight would be saved by using a 24 volt system vs. a 12 volt system.
Assumptions: 0.07 mohm/ft for 00 AWG, 29 mohm/ft for 4 AWG, 10 feet each way from the battery to the starter, 50 amp starter load at 12 volts, 25 starter load at 24 volts.
With the 12 volt system you would lose 3.5 volts across the starter wires while starting and the wire would weigh 7.5 lbs.
For the 24 volt system you would lose 3.6 volts and the wire would weigh 2.4 lbs.
Doug Holub
On Thu, Jul 18, 2013 at 8:10 AM, David Ullman <ullman at robustdecisions.com> wrote:
If you are referring to what I call the starter solenoid, mine is on the
firewall. I thought that was where most people put them to keep the wire
weight down. I have my main in the front.
David Ullman
N444DX
President EAA 292
541-760-2338
david at davidullman.com
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of reflector-request at tvbf.org
Sent: Wednesday, July 17, 2013 12:26 PM
To: reflector at tvbf.org
Subject: Reflector Digest, Vol 100, Issue 71
Send Reflector mailing list submissions to
reflector at tvbf.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.tvbf.org/mailman/listinfo/reflector
or, via email, send a message with subject or body 'help' to
reflector-request at tvbf.org
You can reach the person managing the list at
reflector-owner at tvbf.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Reflector digest..."
Today's Topics:
1. Does anyone have their starter contactor on the firewall?
(Don Johnston)
2. Re: Does anyone have their starter contactor on the
firewall? (Tim Rhodenbaugh)
3. Re: Does anyone have their starter contactor on the
firewall? (Don Johnston)
4. Speed Brake (John Dibble)
5. Re: Does anyone have their starter contactor on the
firewall? (nmflyer1 at aol.com)
6. Re: Does anyone have their starter contactor on the
firewall? (Scott Derrick)
----------------------------------------------------------------------
Message: 1
Date: Wed, 17 Jul 2013 13:10:39 -0500
From: Don Johnston <numa at comcast.net>
To: reflector at tvbf.org
Subject: REFLECTOR: Does anyone have their starter contactor on the
firewall?
Message-ID:
<CALD29ir2d+_B6u=Ew5U0Ze_+Se2S0UVo7z6oUJe0YkuonF6-WQ at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I've got the gear pump assembly from Wayne Lanza which has the battery and
the starter contactor on it.
I'm looking at the wiring and having to run the B-leads from the alternators
all the way up to the nose. It occurred to me that I if the starter
contactor was on the firewall that I could run the alternators to the
battery side of the starter contactor which would allow me to utilize the
low gauge wire already in place between the the starter and battery
contactor.
But every Velocity that I've looked at has the both contactors in the front.
Just wondering anyone has their starter contactor on the firewall.
-Don Johnston
XL-RG
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20130717/91d42ec2
/attachment-0001.html>
------------------------------
Message: 2
Date: Wed, 17 Jul 2013 14:18:33 -0400
From: Tim Rhodenbaugh <timrhod at aol.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: Re: REFLECTOR: Does anyone have their starter contactor on
the firewall?
Message-ID: <26CDE257-6421-49A0-AD29-FD026E202CDE at aol.com>
Content-Type: text/plain; charset=us-ascii
It's been done. I put mine on the firewall. Are you sure it's the starter
contractor on the pump assembly board and not the master contractor? Tim
Rhodenbaugh n370TR XLRG
Sent from my iPad
On Jul 17, 2013, at 2:10 PM, Don Johnston <numa at comcast.net> wrote:
> I've got the gear pump assembly from Wayne Lanza which has the battery and
the starter contactor on it.
>
> I'm looking at the wiring and having to run the B-leads from the
alternators all the way up to the nose. It occurred to me that I if the
starter contactor was on the firewall that I could run the alternators to
the battery side of the starter contactor which would allow me to utilize
the low gauge wire already in place between the the starter and battery
contactor.
>
> But every Velocity that I've looked at has the both contactors in the
front.
>
> Just wondering anyone has their starter contactor on the firewall.
>
> -Don Johnston
> XL-RG
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
------------------------------
Message: 3
Date: Wed, 17 Jul 2013 13:30:11 -0500
From: Don Johnston <numa at comcast.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: Re: REFLECTOR: Does anyone have their starter contactor on
the firewall?
Message-ID:
<CALD29iqf--7FFRExbsu4+XKK8x8jLz_=gs+QVas1rhPGW7i09Q at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I'm sure. :-)
http://www.velocity-xl.com/blog/wp-content/uploads/2011/11/2011-11-16-DSC_01
40.jpg
-Don
On Wed, Jul 17, 2013 at 1:18 PM, Tim Rhodenbaugh <timrhod at aol.com> wrote:
> It's been done. I put mine on the firewall. Are you sure it's the starter
> contractor on the pump assembly board and not the master contractor? Tim
> Rhodenbaugh n370TR XLRG
>
> Sent from my iPad
>
> On Jul 17, 2013, at 2:10 PM, Don Johnston <numa at comcast.net> wrote:
>
> > I've got the gear pump assembly from Wayne Lanza which has the
> > battery
> and the starter contactor on it.
> >
> > I'm looking at the wiring and having to run the B-leads from the
> alternators all the way up to the nose. It occurred to me that I if
> the starter contactor was on the firewall that I could run the
> alternators to the battery side of the starter contactor which would
> allow me to utilize the low gauge wire already in place between the
> the starter and battery contactor.
> >
> > But every Velocity that I've looked at has the both contactors in
> > the
> front.
> >
> > Just wondering anyone has their starter contactor on the firewall.
> >
> > -Don Johnston
> > XL-RG
> > _______________________________________________
> > To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery! www.tvbf.org/gallery user:pw =
> > tvbf:jamaicangoose Check new archives: www.tvbf.org/pipermail Check
> > old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20130717/8052a8ec
/attachment-0001.html>
------------------------------
Message: 4
Date: Wed, 17 Jul 2013 13:52:04 -0500
From: John Dibble <aminetech at bluefrog.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: REFLECTOR: Speed Brake
Message-ID: <51E6E7D4.1050905 at bluefrog.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
A small amount of hydraulic fluid is leaking at the back side of my speed
brake. Looking on the inside it seems to originate where the "cylinder"
connects to the brake. Does the speed brake use hydraulic fluid? If so,
does it come from the retract system, or is it separate?
Thanks,
John
------------------------------
Message: 5
Date: Wed, 17 Jul 2013 15:24:26 -0400 (EDT)
From: nmflyer1 at aol.com
To: reflector at tvbf.org
Subject: Re: REFLECTOR: Does anyone have their starter contactor on
the firewall?
Message-ID: <8D0513A62DEDC1F-D2C-ACF32 at webmail-d143.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"
Both my contactors are in the nose. Running a condiut ground with the main
cable running inside that. Alternator wire runs to the contact point on the
starter where the main cable attaches.
Note: 2-seperate battery system.
Kurt
-----Original Message-----
From: Don Johnston <numa at comcast.net>
To: reflector <reflector at tvbf.org>
Sent: Wed, Jul 17, 2013 12:13 pm
Subject: REFLECTOR: Does anyone have their starter contactor on the
firewall?
I've got the gear pump assembly from Wayne Lanza which has the battery and
the starter contactor on it.
I'm looking at the wiring and having to run the B-leads from the alternators
all the way up to the nose. It occurred to me that I if the starter
contactor was on the firewall that I could run the alternators to the
battery side of the starter contactor which would allow me to utilize the
low gauge wire already in place between the the starter and battery
contactor.
But every Velocity that I've looked at has the both contactors in the front.
Just wondering anyone has their starter contactor on the firewall.
-Don Johnston
XL-RG
_______________________________________________
o change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery ser:pw = tvbf:jamaicangoose heck
new archives: www.tvbf.org/pipermail heck old archives:
http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20130717/537f7e1c
/attachment-0001.html>
------------------------------
Message: 6
Date: Wed, 17 Jul 2013 13:24:35 -0600
From: Scott Derrick <scott at tnstaafl.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: Re: REFLECTOR: Does anyone have their starter contactor on
the firewall?
Message-ID: <51E6EF73.8080103 at tnstaafl.net>
Content-Type: text/plain; charset="us-ascii"
An HTML attachment was scrubbed...
URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20130717/b08c9d36
/attachment.html>
------------------------------
_______________________________________________
Visit the gallery! tvbf:jamaicangoose
End of Reflector Digest, Vol 100, Issue 71
******************************************
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130719/875df2e7/attachment-0001.html>
More information about the Reflector
mailing list