REFLECTOR: Does anyone have their starter contactor on the firewall?

[nmflyer1 at aol.com]

Both my contactors are in the nose. Running a condiut ground with the main cable running inside that. Alternator wire runs to the contact point on the starter where the main cable attaches. 

Note:  2-seperate battery system. 

Kurt 



-----Original Message-----
From: Don Johnston <numa at comcast.net>
To: reflector <reflector at tvbf.org>
Sent: Wed, Jul 17, 2013 12:13 pm
Subject: REFLECTOR: Does anyone have their starter contactor on the firewall?


I've got the gear pump assembly from Wayne Lanza which has the battery and the starter contactor on it. 

I'm looking at the wiring and having to run the B-leads from the alternators all the way up to the nose. It occurred to me that I if the starter contactor was on the firewall that I could run the alternators to the battery side of the starter contactor which would allow me to utilize the low gauge wire already in place between the the starter and battery contactor. 

But every Velocity that I've looked at has the both contactors in the front. 

Just wondering anyone has their starter contactor on the firewall.

-Don Johnston
XL-RG


_______________________________________________
o change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery!  www.tvbf.org/gallery
ser:pw = tvbf:jamaicangoose
heck new archives: www.tvbf.org/pipermail
heck old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130717/537f7e1c/attachment.html>