REFLECTOR: What screw did you use to attach the weights on the elevator ?

[Don Johnston]

As I recall, the diameter of the screws were fine. The length, however, was
a different story. After adding some additional weight to get the elevators
balanced, I had to buy longer screws.


On Tue, Aug 27, 2013 at 6:53 AM, Patrick Sieders <pjsieders at comcast.net>wrote:

> Hello all,****
>
> ** **
>
> I have been looking into attaching the counterweights onto the outboard
> elevators. However, the screws (MS24694S-59) as suggested in the manual do
> not fit. They seem too long and too thin to fit in my case. Do you all have
> the same experience ? How did you all fit the weights onto the elevator ?*
> ***
>
> ** **
>
> Thanks !****
>
> ** **
>
> Patrick****
>
> ** **
>
> ** **
>
> Patrick & Dana Sieders****
>
> Nashville TN 37211****
>
> XLFG-5 (forever 2 more years to go)****
>
> Http://www.sieders.com/sieders****
>
> ** **
>
> ** **
>
> ** **
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130827/1ec3791e/attachment.html>