REFLECTOR: breather augment hose

[Scott Derrick]

Somebody asked about the exhaust augmenter hose and I said I would 
provide a pic.

attached

the light blue portion of the hose is high temp silicone.  You can see a 
small aluminum heat shroud attached to the hose where the hose is close 
to the exhaust header.  Not sure if the shield is really needed but 
couldn't hurt.

  The darker hose is connected with a short thin wall aluminum pipe, 
clamped with safety wire. That is 3/4 hose all the way, bigger is 
better. Smaller hose restricts flow and raises the pressure in the 
crankcase.

The silicone hose hasn't shown any effect of heat damage in 50 hours.

Scott
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2013-08-17_15-07-33_38.jpg
Type: image/jpeg
Size: 182117 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130818/6060c26f/attachment-0001.jpg>