REFLECTOR: Gear actuators packing list

[Brett Ferrell]

Now captured on the Wiki, builder's tips section...


[LINK:
http://www.velocityxl.com/wiki/index.php?title=Landing_Gear_Cylinder_Rebuild]
http://www.velocityxl.com/wiki/index.php?title=Landing_Gear_Cylinder_Rebuild


Brett

On Mar 13, 2012, at 5:38 PM, izzy brownfield <[LINK:
https://www.fastmail.fm/mail/?MLS=MR-**f13928597u40962*;MSS=;SMB-CF=13928597;SMR-PT=;SMR-UM=f13928597u40962;UDm=49;Ust=e58ad55c.0f9e418b;MSignal=MC-FN*U-1*iznstacy%40yahoo.com]
iznstacy at yahoo.com> wrote:
>

>Landing Gear Actuator's  Rebuild Kit Packing's
>

>packing's can be ordered from HD distributing over the Phone  (877)
838-7325 , Online [LINK: http://www.hddistributors.com/]
>www.hddistributors.com , or located at 3236 Irving Blvd. Dallas, Texas
75247 if you would >prefer will call
>

>Main Gear Actuator
>2ea.)   212BN70           .859 ID x .139 CS
>1ea.)   UH-12500562     9/16 x 13/16 x 1/8
>1ea.)   TP-013              1-1/8 OD x 7/8 ID x 3/16  GW
>1ea.)   DY-110x5/16      (5/16 SCREW) .301 ID x .603 OD x .054THK
>

>Nose Gear Actuator
>2ea.)   212BN70           .859 ID x .139 CS
>1ea.)   TP-013              1-1/8 OD x 7/8 ID x 3/16  GW
>1ea.)   DY-110x5/16      (5/16 SCREW) .301 ID x .603 OD x .054THK
>1ea.)   UH-12500375     3/8 x 5/8 x1/8
>

>Nose Gear *DOOR* Actuator
>1ea.)   014BN70           .489 ID X .070 CS
>1ea.)   UH-12500312     5/16 x 9/16 x 1/8
>1ea.)   TP-005              5/8 OD x 3/8 ID x 3/16  GW
>

>notes
>MIL 5606 uses Nitrile packing's
>Pay particular attention to the orientation of the Poly Pak's the open
portion faces towards pressure.  >Looks a little odd buts makes sense if
you think about it.  The more pressure you put on it causes it to >flare
out and increase sealing pressure.
>

>Izzy
>469-569-1479
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120314/5569b83a/attachment.htm>