REFLECTOR: What are you working on?

[nmflyer1 at aol.com]

Milton, 


Good to hear from you :)  You are right... but it sure adds to the stories & adventure :)  


Hope you are well. 


The new gun should arrive in the morning & I am ready. 


A few good thoughts could probably help:) 


Kurt 



-----Original Message-----
From: Milton Mersky <miltonm at airmail.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wed, Jun 6, 2012 7:00 pm
Subject: Re: REFLECTOR: What are you working on?


Kurt:
 
If you did'nt have bad luck you would not have any luck at all.
 
Milton
  
----- Original Message ----- 
  
From:   nmflyer1 at aol.com   
  
To: reflector at tvbf.org 
  
Sent: Wednesday, June 06, 2012 9:23   AM
  
Subject: Re: REFLECTOR: What are you   working on?
  


  
Well, 
  
 
  
I had hoped to have the Fuselage painted by now. But Nooo.  The new   paint gun I bought would not spray right. So I had to go back to my old siphon   gun. That caused so much airborne mist that 1 exhaust fan would not clear the   booth. I turned on the second, and found that I did not have enough filtered   inlet surface to meet the exhaust demand. That caused the booth walls to be   pulled inward. Since it is Cottonwood Tree season right now, that sucked   airborne cotton into the booth. 
  
 
  
See how my luck is working at this point?  :0 
  
 
  
Primer done and finish sanded. Waiting for the new replacement gun to   show up so that I can spray some color on Thursday (barring any other   disasters). 
  
 
  
Send me some good vibes.. I could use them about now. 
  
 
  
Pic attached. 
  
 
  
Kurt 
  
 
  



 
  
-----Original   Message-----
From: Reiff Lorenz <Reiff at lorenz.com>
To: reflector   <reflector at tvbf.org>
Sent: Wed, Jun 6, 2012 8:02 am
Subject:   REFLECTOR: What are you working on?

  
    
  
 
  
The Reflector has been quiet this week. Hopefully that   means that everyone is busy flying or building.
  
 
  
I'd love to hear what the Velocity community is working   on. If your bird is in the air tell us where you're flying.
  
 
  
I've been spending my time on the wings; aileron torque   tubes, wiring for nav/pos/strobe lights, and final fitting of the rudders. I'm   trying to complete all the wing tasks that can be done without them attached   to the fuselage.
  
 
  
Reiff Lorenz, Dayton, OH
  
Velocity XL-RG, 33%   complete
  
 
  
 

  
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


  
  

  
_______________________________________________
To change your email   address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the   gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check   new archives: www.tvbf.org/pipermail
Check old archives:   http://www.tvbf.org/archives/velocity/maillist.html
 
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120607/df12c836/attachment-0001.htm>