REFLECTOR: Heat Vent Plenum

[David Rene Dugas]

Couple comments:  if you use a panel vent to the windshield use a diffuser. I just used a screen an 1 " hose. My  shield now has crazed mildly ONLY where the warm air was blowing directly in my view. Bummer. 
Some have used a recirculation of warned air drawing it repeatedly thru the heater with a bilge blower. I tape off 80% of my inlet and use a 12 volt heated blanket. Seat heaters would be better. 
2 cents about. 

Rene' Dugas
Sent from an Apple. 

On Dec 4, 2012, at 12:37 PM, Glenn Falkenberg <airmech2 at gmail.com> wrote:

> Has anyone done some type of plenum to mix hot air off the fwd oil cooler with vent air to give 
> temperature control? Also being able to control were the air is coming out like floor, panel or defrost.  Any
> ideas on how to do it would be appreciated.
> Thanks
> Glenn Falkenberg
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html