REFLECTOR: Reflector Digest, Vol 78, Issue 46

Sat Sep 17 12:06:46 CDT 2011

Kurt

I have a 173 elite RG

Dan

Sent from my iPhone

On Sep 17, 2011, at 12:00 PM, reflector-request at tvbf.org wrote:

> Send Reflector mailing list submissions to
>    reflector at tvbf.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://www.tvbf.org/mailman/listinfo/reflector
> or, via email, send a message with subject or body 'help' to
>    reflector-request at tvbf.org
> 
> You can reach the person managing the list at
>    reflector-owner at tvbf.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Reflector digest..."
> 
> 
> Today's Topics:
> 
>   1.  Fuel strakes (Dan Schindler)
>   2. Re:  Fuel strakes (nmflyer1 at aol.com)
>   3. Re:  Fuel strakes (Dennis Martin)
>   4. Re:  Fuel strakes (nmflyer1 at aol.com)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sat, 17 Sep 2011 10:08:25 -0500
> From: Dan Schindler <danpilot91 at gmail.com>
> Subject: REFLECTOR: Fuel strakes
> To: "reflector at tvbf.org" <reflector at tvbf.org>
> Message-ID: <F72671E6-7C64-4158-B3C9-2F1EBD5E441C at gmail.com>
> Content-Type: text/plain;    charset=us-ascii
> 
> Getting ready to install fuel strakes any tips and tricks would be much appreciated. 
> 
> Dan Schindler
> 
> Sent from my iPhone
> 
> ------------------------------
> 
> Message: 2
> Date: Sat, 17 Sep 2011 11:16:54 -0400 (EDT)
> From: nmflyer1 at aol.com
> Subject: Re: REFLECTOR: Fuel strakes
> To: reflector at tvbf.org
> Message-ID: <8CE4363F7CC745B-B98-303FB at webmail-m157.sysops.aol.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> Dan, 
> 
> 
> Which model are you building again?
> 
> 
> Kurt 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Dan Schindler <danpilot91 at gmail.com>
> To: reflector <reflector at tvbf.org>
> Sent: Sat, Sep 17, 2011 5:08 am
> Subject: REFLECTOR: Fuel strakes
> 
> 
> Getting ready to install fuel strakes any tips and tricks would be much 
> appreciated. 
> 
> Dan Schindler
> 
> Sent from my iPhone
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110917/bd07a4db/attachment.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Sat, 17 Sep 2011 09:51:51 -0600
> From: Dennis Martin <dennis.doc at gmail.com>
> Subject: Re: REFLECTOR: Fuel strakes
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Message-ID:
>    <CAG8_WT-1ChhndaAYJm7A775TJOXvjmPY=9w9tvN_o3E0SVkcRg at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Jim Agnew passed along a couple of good tips that worked great for me (No
> leaks).
> 
> 1. Build up some really wide tracks on top of all the baffles and bulkheads.
> Put duct tape on the top skin as you form-fit the tracks to the skin so you
> can release the skin and repeat the process 2-3 times. I think I built up
> the width of the tracks with two or three fittings of the top skin. Each
> fitting added maybe 1/4 inch to the width of the tracks. My final tracks
> were at least 3/4" wide.
> 2. Buy 3 or 4 latex based caulk tubes and empty them. Use soap and warm
> water to clean them up. When you're ready to apply the top skin to the
> baffles, fill one of the tubes with your epoxy mixture and lay a nice thick
> bead on all the tracks. The caulking tubes make it really fast and easy to
> get a consistent, thick bead on the tracks.
> 3. When you apply the top skin down on to the tracks, the beads will spread
> out and give you a great fit that won't leak.
> 
> Good luck,
> 
> Dennis
> 
> On Sat, Sep 17, 2011 at 9:08 AM, Dan Schindler <danpilot91 at gmail.com> wrote:
> 
>> Getting ready to install fuel strakes any tips and tricks would be much
>> appreciated.
>> 
>> Dan Schindler
>> 
>> Sent from my iPhone
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>> 
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>> 
> 
> 
> 
> -- 
> All the best,
> Dennis
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110917/b640567a/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 4
> Date: Sat, 17 Sep 2011 12:46:48 -0400 (EDT)
> From: nmflyer1 at aol.com
> Subject: Re: REFLECTOR: Fuel strakes
> To: reflector at tvbf.org
> Message-ID: <8CE437086E9BFA3-474-2E900 at webmail-m147.sysops.aol.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> I wish Jim would have shared that trick with me... Sounds awesome!
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Dennis Martin <dennis.doc at gmail.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Sat, Sep 17, 2011 5:57 am
> Subject: Re: REFLECTOR: Fuel strakes
> 
> 
> Jim Agnew passed along a couple of good tips that worked great for me (No leaks). 
> 
> 1. Build up some really wide tracks on top of all the baffles and bulkheads. Put duct tape on the top skin as you form-fit the tracks to the skin so you can release the skin and repeat the process 2-3 times. I think I built up the width of the tracks with two or three fittings of the top skin. Each fitting added maybe 1/4 inch to the width of the tracks. My final tracks were at least 3/4" wide. 
> 2. Buy 3 or 4 latex based caulk tubes and empty them. Use soap and warm water to clean them up. When you're ready to apply the top skin to the baffles, fill one of the tubes with your epoxy mixture and lay a nice thick bead on all the tracks. The caulking tubes make it really fast and easy to get a consistent, thick bead on the tracks. 
> 3. When you apply the top skin down on to the tracks, the beads will spread out and give you a great fit that won't leak. 
> 
> Good luck,
> 
> Dennis
> 
> 
> On Sat, Sep 17, 2011 at 9:08 AM, Dan Schindler <danpilot91 at gmail.com> wrote:
> 
> Getting ready to install fuel strakes any tips and tricks would be much appreciated.
> 
> Dan Schindler
> 
> Sent from my iPhone
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> 
> 
> 
> -- 
> All the best,
> Dennis
> 
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110917/12c87871/attachment-0001.htm>
> 
> ------------------------------
> 
> _______________________________________________
> Visit the gallery!  tvbf:jamaicangoose
> 
> End of Reflector Digest, Vol 78, Issue 46
> *****************************************