REFLECTOR: Engine air intake

[Kathy Cook]

Kerry, I ran across your email and here's my 2 cents worth:  I have a standard SE IO360 and after some experimentation, have settled on a air intake system that gives me about 1/2" of positive pressure at 140 knots and at 185 knots TAS 3/4" of boost.  This pressure is measured down stream of the air filter (KandN) just prior to the air entering the fuel servo.  If you are interested in some of my findings, feel free to call or email me.  Lynn Cook 530-878-2002
--- On Mon, 9/19/11, Kerry Woods <kwoods241 at att.net> wrote:


From: Kerry Woods <kwoods241 at att.net>
Subject: REFLECTOR: Engine air intake
To: "Velocity Aircraft Owners and Builders list" reflector at tvbf.org
Date: Monday, September 19, 2011, 6:17 AM



There has not been any mention of what works best for intake air. If someone has found a good way to pressurize the intake would they share what they have done.
Thank You
Kerry 
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20111116/33875992/attachment.htm>