REFLECTOR: Side-Stick

Chris Barber cbarber at texasattorney.net
Sat Jun 4 11:49:51 CDT 2011


The SUV had a significantly cut down center console. Since it had one door you entered the pilot side and slid under the yokes and over the console. It is cut below the seat level thus allow about two inches of extra hip room on each side. 

The lack of the second door added to total structural integrity. When I added the second door the factory provided additional layup schedule in the center console/keel for reinforcement. 

Chris

Sent from my iPhone 4

On Jun 4, 2011, at 11:16 AM, "Laurence Coen" <lwcoen at hotmail.com> wrote:

> The Elite model has a structural center console but if DMO 094 is your serial number the that must be pre Elite.  To be on the safe side I'd ask the factory if removing the console is OK.
> 
> Larry Coen
> N136LC
> 
> --------------------------------------------------
> From: "none" <markinchampions at gmail.com>
> Sent: Saturday, June 04, 2011 10:37 AM
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Subject: REFLECTOR: Side-Stick
> 
>> 
>> Has anyone installed a non-Velocity kit side-stick on a Standard  model? This would give more room in the cabin if the console was  removed.
>> 
>> 
>> DM0094
>> _______________________________________________
>> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>> 
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


More information about the Reflector mailing list