REFLECTOR: Fixes for Stick Slop

[Bob Jackson (Jax Tech)]

Nice design and approach!  How many hours do you have on it?  

Don't you still have concerns about the effect on the softer aluminum of the
hard steel bolt?

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Brian Michalk
Sent: Friday, January 07, 2011 1:02 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Fixes for Stick Slop

 

There has been little discussion on a fix.  My solution involves making a
saddle, I'm not sure if it's what the factory does or not.

I think the tubes are 1/2", so I bought some 1/2"ID, .25" wall aluminum
tube.
With about 2" of stock, I first machined a flat on opposing side, leaving
about 1/8" thickness.
Next, cut the tube in half along a plane parallel with the two flats.
Take the two halves, and place them flat to flat, drilling a hole for the
bolt.  The tubes can now be cradled in the saddle.

The flats help support the torque transmitted to the two tubes at right
angles.  For extra smoothness, use a thin teflon washer(or sheet) between
the flats.

On 1/7/2011 11:13 AM, Bob Jackson wrote: 

We've been flying for a couple of years and now have 300+ hours on the
plane.  When we started doing some formation flying recently I began to be
aware that we're developing stick slop -- it's not what you want flying
close formation, or when landing or anytime you need small corrections and
fine attitude control.

 

When we built the plane we were leery of the standard steel AN3 bolt that
joins the bottom of the aluminum stick stub and the aileron/elevator torque
tubes) -- even when improved with the U-shaped steel reinforcing collar that
the factory started shipping.

 

In our case, we know that nearly all of our stick slop comes from this
mechanical connection between the stick's torque tube and the aileron and
elevator torque tubes.  We've been on the Reflector for 12 years, but
haven't heard much, if any talk about this problem and improvements that
builders have made.

 

The question is:  do any of you have good fixes for this connection that
eliminates stick slop?

 

Thanks,

Bob Jackson

N2XF

 
 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 

  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3365 - Release Date: 01/07/11

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110107/14dac1f7/attachment.htm>