REFLECTOR: Damper (Shimmy Damper)

[Laurence Coen]

Scott,

The RG fork is a modification of the FG fork.  The FG fork has the gear leg 
hole drilled front to back instead of top to bottom on your RG fork.  It's 
the same fork but it mounts horizontally instead of vertically.  That 
configuration won't fit in the nose and was modified for the RG models.  The 
damper sits below the gear leg nut which works for the FG but would hit the 
tire on an RG set-up.

Clear?

Larry Coen
N136LC

--------------------------------------------------
From: "Scott Derrick" <scott at tnstaafl.net>
Sent: Saturday, August 27, 2011 8:39 AM
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Subject: Re: REFLECTOR: Damper (Shimmy Damper)

> Hmmm.....
>
> I don't get it?  that doesn't look  like the fork I have on my RG?  That 
> doesn't look like any nose gear fork I've seen?
>
> Scott
>
> -------- Original Message --------
> Subject: Re: REFLECTOR: Damper (Shimmy Damper)
> From: John Tvedte <johnt at comp-sol.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Date: 08/26/2011 04:42 PM
>
>> Some pictures I took during OSH.
>>
>>
>>
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
> -- 
> Realize deeply that the present moment is all you ever have.
> Eckhart Tolle
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>