REFLECTOR: Shimmy dampener fluid mechanics

Darrell & Nora Kufalk kufalk at wi.rr.com
Wed Feb 25 22:46:16 CST 2009


Non-Newtonian fluids explained...

http://www.youtube.com/watch?v=5GWhOLorDtw

 

 

 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Jeff Clough
Sent: Wednesday, February 25, 2009 8:35 PM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Shimmy dampener fluid mechanics

 

Are there any dampener fluids/oils which behave differently or have
different properties depending on the RATE of the forces to which they are
subjected? (Any space age materials available?)   Kinda like corn starch and
water...have y'all eve played with that stuff ?......push on it slowly and
it is like a viscous fluid.....push faster and it really stiffens up a
lot....that would  make taxiing/turning (slow) easier and effectively  stop
the shimmy (fast)  action.....maybe?    There was a TV show a while back
where guys had a pool of cornstarch/water...they could run or walk quickly
across it easily as it was nearly a solid...but go slowly and they would
sink in the liquid.....
  Just wishing....
Jeff C

Al Gietzen wrote: 

Ron;

 

You'll have to tell us how you envision it being installed. It can't support
the load on the nose gear, and is not designed for side loads, so I'm unable
to envision how it could be used.

 

Yes, something of that nature installed between the fork and the leg could
be very helpful; but I don't think this is it.

 

Al

 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Velocity xl
Sent: Wednesday, February 25, 2009 5:16 PM
To: reflector; reflector at tvbf.org
Subject: REFLECTOR: (no subject)

 

http://www.efdyn.com/pdf/xcrd%20page.pdf

 

Here is an idea for a Dampener I dreamed up. There are people that know the
forces

involved here better than I. May be they could tell if this device would
work to stop our

Shimmy problem. Simple small and clean if it would work. Dampener is at the
bottom of the 

Gear leg.

 

Ron

 





  _____  



 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20090225/19af6373/attachment.htm 


More information about the Reflector mailing list