REFLECTOR: Running without prop
Alex Balic
velocity_pilot at verizon.net
Mon Apr 27 16:40:41 CDT 2009
The magneto structure/flywheel is sufficient to run the small engines- it is
enough flywheel for a single cylinder- and it is a little heavier than you
think- it is not straight aluminum- it has iron magnets molded into it.
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Scott Derrick
Sent: Monday, April 27, 2009 4:33 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Running without prop
Actually the tow motor I use for a 210 uses a lawn motor engine, no
blade, just a 4 inch diameter aluminum pulley, very little mass
whatsoever. runs great..
Darrell & Nora Kufalk wrote:
> This will convince you.
> Take the blade off your lawnmower and see if you can get it to run.
>
>
>
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Scott Derrick
> Sent: Sunday, April 26, 2009 6:08 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Running without prop
>
> I've heard the flywheel reason before. I thought the flywheel on my
> io360 was fairly beefy but that didn't seem to make any difference.
>
> I'm still unconvinced.
>
> Scott
>
> Keith Hallsten wrote:
>
>> Or, to be more precise, the prop is a significant portion of the flywheel
>> system that the engine needs to run properly. The ring gear provides
only
>>
> a
>
>> portion of the flywheel effect necessary (and it's often held onto the
>> crankshaft by the same bolts that would also hold the prop on). Thus,
>>
> some
>
>> additional flywheel needs to bolted on.
>>
>> If you don't have a prop, you may be able to substitute a stand-in like a
>> piece of lumber. However, you need to be absolutely sure that it's
sound,
>> balanced, and properly attached. A piece of lumber coming off a running
>> engine would be a lethal missile!
>>
>> Keith Hallsten
>>
>>
>> -----Original Message-----
>> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
>> Behalf Of Laurence Coen
>> Sent: Sunday, April 26, 2009 10:05 AM
>> To: Velocity Aircraft Owners and Builders list
>> Subject: Re: REFLECTOR: Running without prop
>>
>> Scott,
>>
>> I think the difference is that auto engines come with a flywheel and an
>> aircraft engine prop is the flywheel.
>>
>> Larry Coen
>> N136LC
>>
>> --------------------------------------------------
>> From: "Scott Derrick" <scott at tnstaafl.net>
>> Sent: Sunday, April 26, 2009 8:45 AM
>> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
>> Subject: REFLECTOR: Running without prop
>>
>>
>>
>>> _______________________________________________
>>> To change your email address, visit
>>> http://www.tvbf.org/mailman/listinfo/reflector
>>>
>>> Visit the gallery! www.tvbf.org/gallery
>>> user:pw = tvbf:jamaicangoose
>>> Check new archives: www.tvbf.org/pipermail
>>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>>
>>>
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
>> _______________________________________________
>> To change your email address, visit
>>
> http://www.tvbf.org/mailman/listinfo/reflector
>
>> Visit the gallery! www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
>>
>>
>
>
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
More information about the Reflector
mailing list