REFLECTOR: Nose gear doors don't close

[PUSHERPILOT at wmconnect.com]

To all,
I was finally able to get to the sequence valve.  I bought a pair of vise 
grips small enough to grab the valve plunger and hold it while I undid the nut 
and backed out the screw 1 1/2 turns.  The gear doors close just fine now.

If I were building now I think that I would consider the mechanical doors.

Thanks for the responses,

Mel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20081028/83b0a01c/attachment.htm