REFLECTOR: TR: Autopilot servos

[Gilles Ross]

Thanks Alex
Do you know the arm lenght of your attachment in reference with the center
on the torque tube
and which hole (or arm lenght) did you used on the servo arm.
Gilles

-----Message d'origine-----
De : reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]De la
part de Alex Balic
Envoye : 24 mars 2008 10:44
A : 'Velocity Aircraft Owners and Builders list'
Objet : Re: REFLECTOR: Autopilot servos


I put my elevator servo on top of the canard- I bought another trim spring
bracket from Velocity and attached it on the other elevator torque tube-
connected to that- I mounted my roll servo at the end of the keel co Axially
with the aileron torque tube- it is connected to the torque tube with a
small universal joint.

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Gilles Ross
Sent: Sunday, March 23, 2008 8:54 PM
To: reflector at tvbf.org
Subject: REFLECTOR: Autopilot servos

I am looking where BMA autopilot servos have been installed for the elevator
and aileron.

Has anyone installed the elevator servo in the keel?

Gilles

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html