REFLECTOR: TT pitch servo

[Joe Ewen]

Terry,
This looks like a nice arrangement.  Are you using the standard trim spring or are you incorporating it into the servo actuator mechanism?
Thanks,
Joe
  ----- Original Message ----- 
  From: Terry Miles 
  To: 'Velocity Aircraft Owners and Builders list' 
  Sent: Saturday, March 10, 2007 5:43 PM
  Subject: REFLECTOR: TT pitch servo


  Keith,

   

  Here's two pics.  You have to study the geometry a little after you take it out of the box on how to get full deflection within the motion limits of the servo and where exactly to set the rivets on the torque tube.  Here is what we came up with.

   

  No pics of the roll servo, we haven't installed that until the wings go back on and after we got all else placed back there.  

   

  Terry



------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw   Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070324/0cad66f2/attachment.htm