REFLECTOR: How smooth for Smooth Prime?

[Alex Balic]

Hey Doug-

I would go with 150 or even 120- the smooth prime has the best adhesion of
any paint like material I have ever used- kind of akin to liquid white-out
if you get some on your bare skin you will see why- doesn't affect the skin,
but it is very very difficult to remove- I would be surprised to see it
detach from the fiberglass  surface unless oil or silicone was present it
will fill some surprisingly deep scratches and pinholes- just be sure to use
the white foam rollers as directed, you can press the smooth prime into the
pinholes easily- do not sand until you have all of the coats on there- it
will look terrible when you get all of the coats on, but it will smooth
right up with the sander- 

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Douglas Holub
Sent: Thursday, June 28, 2007 3:46 PM
To: reflector at tvbf.org
Subject: REFLECTOR: How smooth for Smooth Prime?

 

To which grit should we sand before we prime? 150?  220?

 

Doug Holub

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070628/854278d8/attachment.html