REFLECTOR: Nose wheel balance

[Al Gietzen]

Subject: REFLECTOR: Nose wheel balance

 

Craig and I believe our nose wheel is slightly out of balance which can give
us some vibration if the nose wheel touches down or lifts off at a little
too high of speed.  Any suggestions on how to balance it?  Can I take it to
my local tire shop and have them balance it?   Is anyone doing this
themselves?  What are you using for weights and how are you attaching them?

John Schoorl

 

John; I put two short lengths of AL angle across the top of a couple of
gallon paint cans.  Shim to level, space them so the ends of the axle rest
on the angles, and let the wheel roll to heavy point down.  Attach weight
opposite until it will stop at any point. See photo. Worked great for me,
wheel runs smooth up to 100 mph. And it's free!

 

Al

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070610/12188cc0/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Wheel balance.JPG
Type: image/jpeg
Size: 34601 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070610/12188cc0/attachment-0001.jpe