REFLECTOR: Aircraft leveling

Ron Brown romott at roadrunner.com
Tue Jul 17 12:50:13 CDT 2007


Hi Jim,

I'm not sure you have a problem.  There is some slop in the gear sockets and if you pick up on wing tip and do your wing tip measurements, then pick up the other wingtip and repeat your measurements, I think you'll see that much (or more) slop.  There has to be some slop to allow the over center linkage to go through to lock.

2.5" difference doesn't sound like much of an issue.  (In fact, unless you have a perfectly flat floor, you can easily get this much error from the floor).

I went flying this morning and checked my 173.  I can push down on the wing and get a about a 2" difference in level.  I can go around and push down on the other wing and I'll get a 2" difference in level the other way.  I think you are fine.

Ronnie
  ----- Original Message ----- 
  From: Jim & Sharon Beck 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Tuesday, July 17, 2007 2:00 AM
  Subject: REFLECTOR: Aircraft leveling



     After a  really hard landing with side drift the gear on my 173 RG showed cracking in the fiberglass & pain and also the gear doors broke loose, more like a semi controlled crash. After removing the gear and all paint and wraps to the core to check for damage, we determined they were not damaged so redid the lay-ups with carbon fiber and reinstalled.  bolts were not bent and go in and out easily and no other apparent damage.  The camber on the axels in the same as before in specs and the upper gear fits tight in the sockets just as it did before but now I have one wingtip about 2& 1/2 inches lower than the other and the spar is no longer level sitting on the ground.. 
    Does anyone have any Ideas as to what could have changed to cause this. I would guess the remedy would be to move the sockets but then this would change the camber and make it necessary to fix that also.  Im planning to flyit this way and see if the legs change shape a little after a few landings as everything else went right back in place.   
    Thanks.
    Jim



------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070717/31f52645/attachment.htm 


More information about the Reflector mailing list