REFLECTOR: Running LOP

[Chuck Jensen]

Joel,
If you are using a 'normalizing' function with the VM1000, then even EGT
bars mean nothing.  If you are not using a 'normalizing' function with
the VM1000, then even EGT bars mean nothing.  Either way, even EGT bars
mean nothing.  However, as you progressively lean out your engine, if
all of your EGTS peak at the same fuel flow (well, within 0.2-0.5 GPH
anyhow) then you are good-to-go.  In that case, you don't need GAMI, you
need to thank your lucky stars.

As Scott will advise you in spades.  The peak temperature of each
cylinder is totally irrelevant!!  The only thing that counts is the fuel
flow at which each cylinder reaches its peak temp, irrespective of what
that temp is.

Chuck Jensen
 


-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Dr. Golf
Sent: Monday, January 01, 2007 8:58 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Running LOP


Thanks Kieth.
If using the VM1000 engine monitor, all the cylinder
bars are at the same level after leaning, what would
the advantage be if I changed to the Gammi injectors?
Joel


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html