REFLECTOR: Gear pressure switch

[Ron Brown]

Jim, they are settable.  There is a small screw inside.  Use a water manometer to set the switch at about 4 inches of water pressure - equal to about 80 kts. 
  ----- Original Message ----- 
  From: Jim & Sharon Beck 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Sunday, February 18, 2007 12:55 PM
  Subject: REFLECTOR: Gear pressure switch


  I was doing a retract test and for got to put a jumper on the switch and they retracted anyway, Does anyone know if these switches are fixable. Mine has worked for 200 hours and was working properly about 3 months ago last time I check.
  Thanks 
  Jim, 173 RG


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw   Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070218/78458c2e/attachment.htm