REFLECTOR: Franklin Power Settings

[Steve]

Mike,

I used the metric info and converted to this .....attached

Steve

Michael Watson wrote:

> Are there any Franklin drivers out there using GRT's  EIS-6000 unit
> and have converted the manual's data to inHg and have the following
> Information handy. I hate to go through the exercise if it is out there.
>
> In order to display percent power, you have to supply MAP and RPM
> settings at sea level for 55% AND 75% power. The same info including
> Delta/HP (change in Horsepower) is required for altitudes of 2000, 4000,
> 6000, 8000, 10000 and 12000 feet.
>
> A couple of years ago before I purchased the EIS, I came up with
> These rough calculations.
>
> 65% power at 4500 ft.                   65% power at 8500 ft.
> Map 23hg 2400m RPM                  Map 22hg 2400 RPM
> Map 22hg 2500m RPM                  Map 21g 2500 RPM
> Map 21hg 2600m RPM                  Map 20g 2600 RPM
>
> 75% power at 4500 ft.                   75% power at 8500 ft.
> Map 25hg 2400m RPM                  Map 24hg 2400 RPM
> Map 24hg 2500m RPM                  Map 23hg 2500 RPM
> Map 23hg 2600m RPM                  Map 22hg 2600 RPM
>
> Any help would be appreciated. Thanks.
>
>
> -- 
> Mike W
> 1997 Velocity Elite RG
> Franklin /IVO Electric CS
>
>------------------------------------------------------------------------
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw >Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Franklin_pwr_settings.xls
Type: application/vnd.ms-excel
Size: 19968 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070205/1c7dbf62/attachment-0001.xls