REFLECTOR: FUEL PRESSURE PUZZLE

[MMurp16900 at aol.com]

Hi Tom
regarding your fuel pressure indication
The fuel pressure is taken from the other side from the fuel inlet side of  
the fuel servo.
inside between the inlet and 1/16 restrict to the pressure sensor find a  
finger screen. Is it clean?
 
Check all hoses.Run a numbered drill in the hose. I have found a piece of  
rubber that acts as a check valve  restricting flow in one direction.
Did you know that an Ad is issued on Vane type pumps that may apply.
Have you tried using a automotive  gage.to check pressure?
Best Regards 
Mack Murphree 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060902/ef3e7990/attachment.htm