REFLECTOR: Velocity 20B update

[John Dibble]

Is your need for more down elevator based on running out of trim, or is
the elevator at the max up position?  More trim can be obtained by
reversing the sparrow strainer.  That might be preferred over shortening
the canard.
John

Al Gietzen wrote:

> Just to let you know that flight testing is continuing, and we’ve just
> passed 15 hours of flight time.  Overall, the plane and engine are
> doing fine.  Things are trimmed out now for straight and true handling
> (and even fuel flow from both tanks).  The remaining issue is too much
> canard, even after reducing incidence by a bit over 1 degree.  The
> consensus of the experts (Scott, Scott, and Alan Shaw) is to shorten
> the canard (cut about 4” sections out of both sides).  Ouch!  Probably
> going to also add some vg’s on the wings forward of the ailerons which
> could help at the low speed end, but will not help the need for too
> much down elevator (trailing edge up) when I get to about 175 KIAS.
>
> There must be lots of Wingco canards flying.  Am I the only one with
> this issue?  Wondering if my ‘leading edge extensions’ on the strake
> (a la Long-EZ); http://members.cox.net/alg3/airplane.htm, might be
> adding a bit of lift under the strake forward of the normal center of
> lift.
>
> I’ll have to add I am very pleased with the operation of the 3–rotor
> rotary engine – in spite of few minor glitches still with the ECU.  It
> starts easily hot or cold, runs smooth, plenty of power, and easy
> one-lever operation. Haven’t established top end yet, but did get up
> to about 205 KTAS (175 KIAS at DA of close to 10,000 ft).  After gear
> up on takeoff the VSI strip pegs out at 1000 fpm with close to 2100 #
> total weight. If you want fast descent; gear down, power off (no
> worries about shock cooling), and push both rudders out. Nice high
> controlled sink rate.
>
> Oh, yeah, and I’m now able to fly the plane myself after some good
> checkout help from Steve Murphree.
>
> Lots of work and testing left to do.
>
> BTW, in chatting with Alan I learned he is back in operation with some
> military contracts, and back to finishing some redesign on the
> Atlantica with plans for constructing again at some point.  Good
> news.  You have to admire tenacity and innovation.
>
> Al
>
>    ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw > Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20061101/bf4e2f22/attachment.html